How to repair the damage of power dual aviation obstacle light?

The power dual aviation obstacle light may be damaged due to various reasons during use. When this is found, it needs to be repaired in time. The following will introduce the maintenance method after the damage of the power dual aviation obstacle light.

The damaged power twin aviation obstacle light needs to be removed for repair. When disassembling, operate correctly to avoid other damage. After removing the damaged lamp, inspect the damaged part to determine which part caused the failure.

If the damage is caused by the bulb burning out, just replace the bulb. Choose the same type of bulb as the original bulb for replacement to ensure compatibility and stability. When replacing the bulb, pay attention to turn off the power to avoid electric shock and ensure operation.

If the damage is caused by a line failure, first check whether the line is short-circuited or in poor contact. A multimeter can be used to measure, find the location of the break or short circuit, and repair it. When repairing the line, pay attention to keep the line clean and stable to ensure the normal transmission of current.

If the damage is caused by the broken shell, you can use glue or tape to repair. Clean the damaged part before repairing to ensure the firmness and tightness of the bond. After repairing, let the glue or tape dry for a while to ensure the repair effect.

After the maintenance is completed, it is necessary to install the power dual aviation obstacle light again to ensure that the installation is firm and stable. When installing, pay attention to the connection and fixing of the line to ensure the normal use of the lamp. After installation, you can turn on the power for testing to ensure that the repair effect is good and there are no other problems.

In short, the maintenance methods after the damage of the power dual aviation obstacle lamp mainly include replacing the bulb, repairing the line and repairing the shell. When carrying out maintenance, pay attention to the operation specifications to ensure the repair effect. I hope the above content can help you, thank you!